Repair procedures: Disassembly

Remove the alternator cover (A) using a screw driver (B).

Fig 1: Removing Alternator Cover Using Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Identifying Mounting Bolts Of Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR CO.
Remove the nut, pulley (A) and spacer.

Fig 4: Identifying Alternator Nut, Pulley
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 through bolts (A).

Fig 5: Identifying Mounting Bolts Of Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor (A) and cover (B).

Fig 6: Identifying Rotor And Cover
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse of disassembly.