LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2011 >> Accent GLS, Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Power Window Switch >> Repair procedures >> Inspection >> Assist/Rear Power Window Switch

Assist/Rear Power Window Switch

  1. Disconnect the negative (-) battery terminal.
  2. Remove the door trim panel.

    (Refer to "REAR DOOR TRIM REPLACEMENT ")

  3. Disconnect the 7P connector from the switch.
    Fig 1: Identifying Rear Power Window Switch Connector Terminals
    G06882639Courtesy of HYUNDAI MOTOR CO.
  4. Check for continuity between the terminals in each switch position according to the table. If the continuity condition is not normal, replace the switch.
    Fig 2: Rear Power Window Switch Continuity Chart
    G06882640Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals