LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Sonata GLS, Standard >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Power Window Relay >> Inspection

Power Window Relay: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the junction box.
  3. Check for continuity between the terminals.
  4. There should be continuity between the No. 1 in the I/P-G and No. 12 terminal in the I/P-A when power and ground are connected to the No. 1 terminal in the I/P-G and No. 2 terminal in the I/P-A.
  5. There should be no continuity between the No. 1 terminal in the I/P-G and No. 12 terminal in the I/P-A when power is disconnected.
    Fig 1: Identifying Junction Box (1 Of 2)
    G04881803Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying Junction Box (2 Of 2)
    G04881804Courtesy of HYUNDAI MOTOR CO.
    Fig 3: Continuity Chart
    G04893177Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals