LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Sonata GLS, Standard >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch >> Replacement

Ignition Switch: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad side cover (A).
    Fig 1: Identifying Crash Pad Side Cover
    G06109893Courtesy of HYUNDAI MOTOR CO.
  3. Remove the ignition switch (A) after loosening the screw and disconnecting the 6P connector.
    Fig 2: Identifying Ignition Switch
    G04803142Courtesy of HYUNDAI MOTOR CO.
  4. Remove the steering column shaft (Refer to the STEERING COLUMN & SHAFT (STEERING SYSTEM) ).
  5. Remove the key warning switch and key illumination lamp (A) after loosening the screws and disconnecting the 6P connector.
    Fig 3: Identifying Key Warning Switch And Key Illumination Lamp
    G06110561Courtesy of HYUNDAI MOTOR CO.
  6. If it is necessary to remove the key lock cylinder (A), Remove the key lock cylinder (A) after pushing lock pin (B) with key ON.
    Fig 4: Identifying Key Lock Cylinder And Pushing Lock Pin
    G04881706Courtesy of HYUNDAI MOTOR CO.
  7. Installation is the reverse of removal procedure.
scientia non olet · About LEMON Manuals