LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - (A5GF1) >> Output Speed Sensor >> Installation

Output Speed Sensor: Installation

  1. Install the new O-ring to the output speed sensor.
  2. Install the output speed sensor.

    Tightening torque: 

    10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

    CAUTION: While installing the output speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals