LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - (A5GF1) >> Input Speed Sensor >> Installation

Input Speed Sensor: Installation

  1. Install the new O-ring to the input speed sensor.
  2. Install the input speed sensor.

    Tightening torque: 

    10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

    CAUTION: While installing the input speed sensor, do not allow dust or other foreign particles to enter the transaxle.
  3. Check the connector for dust, dirt, or oil, and then connect the connector securely.
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals