LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Sonata GLS, Automatic >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Automatic Transaxle Control System - (A5GF1) >> Inhibitor Switch >> Installation

Inhibitor Switch: Installation

  1. Set the inhibitor switch to the "N" position.
  2. Set the inhibitor switch control shaft to the "N" position.
  3. Install the inhibitor switch and manual control lever.

    Tightening torque 

    Shaft nut: 18~25Nm (1.8~2.5kgf.m, 13.0~18.1lb-ft)

    Bolt (2EA): 10~12Nm (1.0~1.2kgf.m, 7~8lb-ft)

  4. Install the control cable to the manual control lever.
  5. Connect the inhibitor switch connector.
  6. Installation is the reverse of the removal.
  7. Turn the ignition switch ON after installation.

    Move the shift lever from "P" range to "L" range, and verify that the A/T gear position indicator follows the transaxle range switch. [Reference data]

scientia non olet · About LEMON Manuals