LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Genesis Coupe 2.0T, Automatic >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRS Control Module (SRSCM) >> Front Impact Sensor (FIS) >> Repair Procedures >> Removal

Repair Procedures: Removal

CAUTION:
  • Removal of the airbag must be performed according to the precautions/procedures.
  • Before disconnecting the front impact sensor connector, disconnect the front airbag connector (s).
  • Do not turn the ignition switch ON and do not connect the battery cable while replacing the front impact sensor.
  1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work.
  2. Remove the front bumper. (Refer to FRONT BUMPER )
  3. Disconnect the Front Impact Sensor connector.
  4. Remove the Front Impact Sensor mounting nut.
    Fig 1: Identifying Front Impact Sensor, Connector, & Mounting Nut
    G06513034Courtesy of HYUNDAI MOTOR CO.
  5. Remove the Front Impact Sensor.
scientia non olet · About LEMON Manuals