LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Genesis Coupe 2.0T Track >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRS Control Module (SRSCM) >> Side Impact Sensor (SIS) >> Repair Procedures >> Removal >> Side Impact Sensor

Side Impact Sensor

  1. Disconnect the battery negative cable and wait for at least three minutes before beginning work.
  2. Remove the rear seat. (Refer to REAR SEAT )
  3. Remove the luggage side trim. (Refer to INTERIOR TRIM )
  4. Disconnect the side impact sensor connector.
  5. Loosen the side impact sensor mounting bolt and remove the side impact sensor.
    Fig 1: Identifying Side Impact Sensor, Connector, & Mounting Bolt
    G06513037Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals