General Information: DTC Detecting Condition
DTC DETECTING CONDITION AND POSSIBLE CAUSE
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- Check for multiple signals
|
- Open or short in TRANSAXLE RANGE SWITCH
- Faulty Shift cable adjustment
- Faulty Inhibitor switch and Manual control lever position adjustment
- Faulty TRANSAXLE RANGE SWITCH
- Faulty PCM
|
| Enable Conditions |
|
| Threshold Value |
|
| Diagnostic Time |
|
| Fail Safe |
- Recognition as previous signal
- When signal is input "D" and "N" at the same time, TCM regards it as "N" RANGE.
- After PCM/TCM Reset, If the if the PCM/TCM detects multiple signal or no signal, then it holds the 3rd gear position.
|