LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra GLS >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil >> Repair procedures >> Inspection

Repair procedures: Inspection

  1. Measure the primary coil resistance between terminals 1 and 2.

    Standard value:  0.58 ± 10% (Ω)

  2. Measure the secondary coil resistance between the high-voltage terminal for the No. 1 and No. 4 cylinders, and between the high-voltage terminals for the No. 2 and No. 3 cylinders.

    Standard value:  8.8 ± 15% (KΩ)

    CAUTION: When measuring the resistance of the secondary coil, be sure to disconnect the ignition coil connector.
    Fig 1: Measuring Secondary Coil Resistance Between High-Voltage Terminal For Cylinders
    G06863068Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals