LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra GLS >> Repair and Diagnosis >> Body & Frame >> Windows >> Interior >> Crash Pad >> Repair procedures >> Replacement >> Heater Control Unit Replacement

Heater Control Unit Replacement

  1. Remove the center fascia panel.
  2. Remove the crash pad lower tray (A).
    Fig 1: Removing Crash Pad Lower Tray
    G06864143Courtesy of HYUNDAI MOTOR CO.
  3. After loosening the heater control mounting screws, remove the heater control unit (A).
    Fig 2: Removing Heater Control Unit
    G06864144Courtesy of HYUNDAI MOTOR CO.
  4. Installation is the reverse of removal.
    NOTE:
    • Make sure the connector is plugged in properly.
scientia non olet · About LEMON Manuals