LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra GLS >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Ignition Switch Assembly >> Repair procedures >> Removal

Repair procedures: Removal

  1. Disconnect the negative (-) battery terminal.
  2. Remove the shroud (Steering column cover).

    (Refer to the STEERING COLUMN AND SHAFT ).

  3. Remove the ignition switch (A) after loosening the screw (B) with IG ON and disconnecting the 6P connector (C).
    Fig 1: Removing Ignition Switch
    G06864629Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Identifying 6P Connector
    G06864630Courtesy of HYUNDAI MOTOR CO.
  4. Remove the steering column cover (Refer to the STEERING COLUMN AND SHAFT ).
  5. Remove the door warning switch and key illumination lamp (A) after loosening the screw and disconnecting the 6P connector.
    Fig 3: Removing Door Warning Switch And Key Illumination Lamp
    G06864631Courtesy of HYUNDAI MOTOR CO.
  6. If it is necessary to remove the key lock cylinder (A), Remove the key lock cylinder (A) after pushing lock pin (B) with key ACC.
    Fig 4: Removing Key Lock Cylinder
    G06864632Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals