LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Elantra Blue >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Description and Operation >> Pattern State >> Delayed Room Lamp

Delayed Room Lamp

  1. ROOM LAMP lights 100% at DOOR OPEN (4DOOR SW ON).

    At DOOR CLOSE (4DOOR SW OFF), the lamp phases out lighting up to 0% in 2sec after lighting 100% for 30sec.

  2. Resolution is 32 STEP or more.
  3. The lamp is immediately turned OFF at ALL DOOR LOCK or IGN SW is ON during T1 (phasing out lighting for 2sec).
  4. Should be no phasing out lighting if 4DOOR SW ON time is 0.08sec or less.
  5. Should be no flashing.
  6. Should be no flashing under 4DOOR OPEN and ROOM LAMP ON at IGN1 ON.
  7. ROOM LAMP is turned ON for T3 when TX UNLOCK signal is received under DOOR CLOSE.

    ROOM LAMP signal output is extended for T3 if Tx UNLOCK signal is received under ON state.

    The lamp lights continuously at DOOR OPEN under ON state. Operation in (1) is performed at DOOR CLOSE. ROOM LAMP signal is turned OFF at ALL DOOR LOCK during ROOM LAMP ON. (phasing out for 2sec).

    Fig 1: Identifying Room Lamp Signals
    G06864352Courtesy of HYUNDAI MOTOR CO.

    T1 : 30s ± 3s, T2 : 2 ± 0.2s,

    T3 : 32 ± 3.2s

scientia non olet · About LEMON Manuals