LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera Limited >> Repair and Diagnosis >> Body & Frame >> Seats >> Body Control - Power Seat Module >> B1954 Slide Motor Or Sensor Error >> Verification of Vehicle Repair

Verification of Vehicle Repair

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode and then clear DTC
  2. Operate the vehicle and monitor the DTC on the scantool
  3. Are any DTCs present?

    YES 

    • Go to the applicable troubleshooting procedure.

    NO 

    • System is performing to specification at this time.
scientia non olet · About LEMON Manuals