LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera GLS >> Repair and Diagnosis >> Electrical >> Body Electrical >> General Information - Body Electrical System >> General Information >> General Troubleshooting Information >> Testing And Repairs

Testing And Repairs

  1. Do not use wires or harnesses with broken insulation.

    Replace them or repair them by wrapping the break with electrical tape.

  2. After installing parts, make sure that no wires are pinched under them.
  3. When using electrical test equipment, follow the manufacturer's instructions and those described in this service information.
  4. If possible, insert the probe of the tester from the wire side (except waterproof connector).
    Fig 1: Inserting Probe Of Tester From Wire Side (Except Waterproof Connector)
    G06805427Courtesy of HYUNDAI MOTOR CO.
  5. Use a probe with a tapered tip.
    Fig 2: Identifying Probe With Tapered Tip
    G06805428Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals