LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2010 >> Azera GLS >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Communication Devices >> Body Control Module (BCM) >> Body Control Module (BCM) >> Repair procedures >> Replacement

Repair procedures: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel (A). Avoid damaging retaining clip. (Refer to the CRASH PAD )
    Fig 1: Identifying Crash Pad Lower Panel
    G06802370Courtesy of HYUNDAI MOTOR CO.
  3. Remove ICM relay connector and 2 nuts.
    Fig 2: Identifying ICM Relay Connector
    G06802371Courtesy of HYUNDAI MOTOR CO.
  4. Remove the body control module (A) and tilt & telescope unit after loosening 2 nuts and disconnecting connector.
    Fig 3: Identifying Body Control Module
    G06802372Courtesy of HYUNDAI MOTOR CO.
  5. Remove the body control module (B) from the tilt & telescope unit (A) after loosening a bolt.
    Fig 4: Identifying Body Control Module
    G06802373Courtesy of HYUNDAI MOTOR CO.
  6. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals