Starting After Replacing

Starting is possible by following process after replacing new smart key unit or MSL.

1. If IG OFF is done in P, IG ON will not be impossible because the MSL is locked.
   • If press a push knob switch twice in 3 seconds, IG ON will be done because MSL is unlocked.
2. Immobilizer lamp is ON after inserting a smart key.
   • If press a push knob switch twice in 3 seconds, IG ON will be done because MSL is unlocked.
   NOTE:

   • Starting is impossible when the lamp is not ON after inserting a smart key.
   • Even if the solenoid is unlocked by pressing the brake pedal 3 times, check the steering column whether or no it is unlocked.