Monitor Scan Tool Data

1. Connect scan tool to Data Link Connector (DLC).
2. IGN "ON" & Engine "OFF"
3. Monitor the "KEY STATUS"/"SMARTRA STATUS" and "ECU STATUS" Parameter on the Scan tool.

   Specification: 'LEARNT'

   Fig 1: Monitoring KEY Status Smartra Status And ECU Status Parameter

   Courtesy of HYUNDAI MOTOR CO.
4. Is the "SMARTRA STATUS" Parameter within specifications ?

YES 

• Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

NO 

• Go to "Inspection & Repair" procedure.