LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Tucson SE, 4WD >> Repair and Diagnosis >> Transmission >> Transfer Case Assembly >> DTC Troubleshooting Procedure >> DTC P1718 Steering Wheel Angle Sensor 2-Input Signal >> Terminal & Connector Inspection

Terminal & Connector Inspection

  1. Many malfunctions in the electrical system may be caused from poor harness and terminals. These faults can be caused by interference from other electrical systems and mechanical or chemical damage.
  2. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage.

    Has a problem been found?

    YES  : -->pair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO  : --> to the next procedure.

scientia non olet · About LEMON Manuals