Check PCM/TCM
- Connect scantool to data link connector (DLC)
- Ignition "ON" & Engine "OFF".
- Select A/T Solenoid valve Actuator test and Operate Actuator test.
- Can you hear operating sound for sound LR SOLENOID VALVE Actuator Testing Function?
YES
- Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Substitute with a known-good PCM/TCM and check for proper operation. If the problem is corrected, replace PCM/TCM as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
ACTUATOR TEST CONDITION
- IG SWITCH ON
- TRANSAXLE RANGE SWITCH is normal
- P RANGE
- Vehicle Speed 0 km/h
- Throttle position sensor < 1V
- IDLE SWITCH ON
- ENGINE RPMO