Component Inspection

Connect Oil pressure gauge to "UD" and "2ND" port.
Engine "ON".
Drive a car with gear position 2 in "SPORTS MODE".

Compare it with reference data as below

Specification :

[Operating Element Of Each Shifting Range]

REFERENCE DATA

Measurement Condition			Standard hydraulic pressure kPa
Select level position	Shift position	Engine speed rpm	Under drive clutch pressure (UD)	Reverse clutch pressure (REV)	Overdrive clutch pressure (OD)	Low and reverse brake pressure (LR)	Second brake pressure (2ND)	Damper clutch apply pressure (DA)	Damper clutch release pressure (DR)
P	-	2,500	-	-	-	260~340	-	-	220~360
R	Reverse	2,500	-		-	1,270~1,770	-	-	500~700
N	Neutral	-	-	-	-	260~340	-	-	220~360
D	1st gear	2,500	1,010~0,050	-	-	1,010~0,050	-	-	500~700
	2nd gear	2,500	1,010~0,050	-	-	-	1,010~0,050	-	500~700
	3rd gear	2,500	780~880	-	780~880	-	-	More than 750	450~650
	4th gear	2,500	-	-	780~880	-	780~880	More than 750	450~650

* The values are subject to change according to vehicle model or conditions

Is oil pressure value within specifications?
YES
- Repair AUTO TRANSAXLE (Clutch or Brake) as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.
NO
- Replace AUTO TRANSAXLE (BODY CONTROL VALVE faulty) as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.