LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Santa Fe SE, FWD >> Repair and Diagnosis >> Restraints >> Air Bag, SRS >> SRS Control Module (SRSCM) >> Occupant Classification Sensor (OCS) >> Installation

Occupant Classification Sensor (OCS): Installation

  1. Install the OCS equipped seat cushion. (Refer to SEAT )
  2. Install the front seat assembly. (Refer to FRONT SEAT )
  3. Reconnect the battery negative cable.
  4. After installing the OCS, confirm proper system operation : Turn the ignition switch ON, the SRS indicator should be turned on for about six seconds and then go off.

    Telltale lamp will turn on for 4 seconds and be turned off for 4 seconds. After the 8 seconds, it shall remain off if the OCS does not require suppression and the passenger airbag is enabled.

    NOTE: Be sure to perform OCS (PODS) reset with Hi-Scan (Pro) after replacing OCS equipped seat cushion.
scientia non olet · About LEMON Manuals