Monitor Scan Tool Data
* It is difficult to "STALL TEST" in 5th gear, so that Go to "W/HARNESS INSPECTION " procedure
Operating Element Of Each Shifting Range
GEAR POSITION CHART
| Gear Position | Element | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| L/R Brake | 2ND Brake | U/D Clutch | O/D Clutch | RED Brake | DIR Clutch | REV Clutch | OWC1 | OWC2 | |
| 1st | • | • | • | • | • | ||||
| 2nd | • | • | • | • | |||||
| 3rd | • | • | • | • | |||||
| 4th | • | • | • | • | |||||
| 5th | • | • | • | ||||||
| REV | • | • | • | ||||||
| N, P | • | • | |||||||
* Low & Reverse Brake is released When the Vehicle speed over the 5 MPH (7Km/h)