LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Genesis 4.6 >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 12 (Automatic Transaxle System (Tb-65/60N)) >> Troubleshooting For DTC >> P0601 Internal Control Module Memory Check Sum Error >> Verification of Vehicle Repair

Verification of Vehicle Repair

WARNING: This page is about a different variant/trim than selected.

After a repair, it is essential to verify that the fault has been corrected.

  1. Connect scantool and select "Diagnostic Trouble Codes (DTCs)" mode.
  2. Using a scan tool, Clear DTC.
  3. Operate the vehicle within DTC Enable conditions in General information.
  4. Are any DTCs present?

    YES 

    • Go to the applicable troubleshooting procedure

    NO 

    • System performing to specification at this time.
scientia non olet · About LEMON Manuals