P0722 Output Speed Sensor Circuit No Signal: DTC Detecting Condition
DTC P0722 DETECTING CONDITION REFERENCE
| Item |
Detecting Condition |
Possible Cause |
| DTC Strategy |
- No pulse (Short to B+, ground and open)
|
- Open or short in circuit
- Faulty output speed sensor
- Faulty TCM
|
| Enable Conditions |
- Engine "ON"
- Input RPM > 550rpm
- 10.2V < Battery Voltage < 14V
- CAN Communication : Normal
- Not in Fail Safe mode
- Inhibitor switch = "D" range
- Not in shifting mode
- Input, Inhibitor switch, engine torque = Normal
- All solenoid Valves = Normal
|
| Threshold Value |
- Input speed signal is 12 pulse but no output speed signal
|
| Diagnostic Time |
|
| Fail Safe |
- No lock up slip control
- No sports mode control
- No self learning control
- No torque reduction control
- No up shift to 5th and 6th
|