LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Genesis 3.8 >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System (Tb-65/60N) >> Troubleshooting For DTC >> P0708 Transmission Range Sensor Circuit High Input >> Power Circuit Inspection

Power Circuit Inspection

  1. Disconnect Inhibitor switch.
  2. Ignition "ON" & Engine "OFF".
  3. Check voltage between power terminal of inhibitor switch harness connector and chassis ground.

    Specification:  B+

  4. Is the measured voltage within specification?

    YES 

    NO 

    • Check meeting fuse on IG 1 power and check open in harness between battery and inhibitor switch. Repair or replace as necessary and then, go to "VERIFICATION OF VEHICLE REPAIR " procedure.
scientia non olet · About LEMON Manuals