LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Elantra Touring Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> Inspection Chart For Diagnostic Trouble Codes (DTC) >> P0605 Internal Control Module Read Only Memory (ROM) Error >> Monitor GDS Data

Monitor GDS Data

  1. Connect GDS to data link connector (DLC)
  2. Ignition "ON".
  3. Confirm the "ROM I.D"
  4. Perform the "ROM UP-DATE"
  5. Perform the Re-diagnosis
  6. Is "DTC" disappeared?

    YES 

    • Fault is intermittent caused by poor contact in the sensor's and/or PCM/TCM's connector or was repaired and PCM/TCM memory was not cleared. Thoroughly check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration or damage. Repair or replace as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure

    NO 

scientia non olet · About LEMON Manuals