LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Elantra Touring Automatic >> Repair and Diagnosis >> Body & Frame >> Power Windows >> Power Window Relay >> Inspection

Power Window Relay: Inspection

  1. Disconnect the negative (-) battery terminal.
  2. Remove the crash pad lower panel. (Refer to "CRASH PAD )
  3. Remove the junction box.
  4. Check for continuity between the terminals.
  5. There should be continuity between the No.2 in the I/P-F and No. 17 terminal in the I/P-B when power and ground are connected to the No.2 terminal in the I/P-H and No. 17 terminal in the I/P-B.
  6. There should be no continuity between the No.2 terminal in the I/P-F and No. 17 terminal in the I/P-B when power is disconnected.
    Fig 1: Identifying Crash Pad Lower Panel
    G05365428Courtesy of HYUNDAI MOTOR CO.
    Fig 2: Power Window Relay Terminal Chart
    G05365508Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals