Charging System: Alternator: Disassembly

1. Remove the generator cover (A), removing the nuts (B)
   Fig 1: Identifying Generator Cover Nuts

   Courtesy of HYUNDAI MOTOR CO.
2. Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).
   Fig 2: Identifying Mounting Bolts And Brush Holder Assembly

   Courtesy of HYUNDAI MOTOR CO.
3. Remove the slip ring guide (A).
   Fig 3: Identifying Slip Ring Guide

   Courtesy of HYUNDAI MOTOR CO.
4. Remove the nut, pulley (A) and spacer.
   Fig 4: Identifying Pulley

   Courtesy of HYUNDAI MOTOR CO.
5. Loosen the 4 through bolts (A).
   Fig 5: Identifying Through Bolts

   Courtesy of HYUNDAI MOTOR CO.
6. Disconnect the rotor (A) and cover (B).

Fig 6: Identifying Rotor And Cover

Courtesy of HYUNDAI MOTOR CO.