DTC P0606 ECM/Pcm Processor (ECM-Self Test Failed): DTC Detecting Condition

DTC P0606 DETECTING CONDITION TABLE

Item		Detecting Condition	Possible Cause
DTC Strategy		Check failure of controller operation	Poor connection or damaged harness Faulty ECM
Enable Conditions		10V < Battery voltage > 16V
Threshold Value	Case1	Internal processor error for 60 sec. after ignition ON
Threshold Value	Case2	Communication between inner controller error for 2 times
Diagnostic Time	Case1	60 sec.
Diagnostic Time	Case2	1 sec.
MIL On Condition		2 Driving Cycles