DTC P0335 Crankshaft Position Sensor A Circuit: DTC Detecting Condition

DTC P0335 DETECTING CONDITION TABLE

Item		Detecting Condition	Possible Cause
DTC Strategy		Check camshaft signal switching	Open or short in signal, ground or power supply circuit Poor connection or damaged harness Damage to the connecting flange/flywheel Misadjusted crankshaft and camshaft pulley position Faulty CKP sensor
Enable Conditions		6V< Battery voltage < 16V Camshaft signal valid
Threshold Value	Case1)	No crankshaft teeth during 4 camshaft signal transition
	Case2)	Crankshaft teeth detected but synchronization not successful
	Case 3)	No signal or Number of Crankshaft Teeth within one revolution is abnormal
Diagnosis Time	Case1)	2 revolutions
	Case2)	2 revolutions
	Case 3)	2.5 revolutions
MIL On Condition		2 Driving Cycles