LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2009 >> Azera GLS >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Immobilizer Control System >> DTC Codes >> DTC P169A SMARTRA Authentication Fail >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Connect scantool to Data Link Connector (DLC).
  2. IGN "ON" & Engine "OFF"
  3. Monitor the "KEY STATUS", "SMARTRA STATUS" and "ECU STATUS" Parameter on the Scantool.

    Specification : 'LEARNT'

    Fig 1: Scan Tool Display - Key Status (Learnt)
    G05536983Courtesy of HYUNDAI MOTOR CO.
  4. Is the "SMARTRA STATUS" Parameter within specifications ?

    YES 

    • Check connectors for looseness, poor connection, bending, corrosion, contamination, deterioration, or damage. Repair or replace as necessary and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.

    NO 

    • Go to "Inspection & Repair" procedure.
scientia non olet · About LEMON Manuals