Component Inspection
- Check SMARTRA
- IGN "ON" & Engine "OFF"
- Neutralize "SMARTRA" and Register transponder key by scantool.NOTE: Pin code is required to Neutralize SMARTRA and to Register transponder key
- Are Neutralizing and Registering completed normally ?
YES
- Perform all the key teaching procedure with scantool. (All the keys must be retaught) and then, go to "VERIFICATION OF VEHICLE REPAIR " Procedure.NOTE: Never change the password after SMARTRA is neutralized with scantool Otherwise, Virgin TP only possible to register.
NO
- Substitute with a known-good SMARTRA and check for proper operation.
If the problem is corrected, replace SMARTRA and then go to "VERIFICATION OF VEHICLE REPAIR " procedure.
- Perform all the key teaching procedure with scantool. (All the keys must be retaught) and then, go to "VERIFICATION OF VEHICLE REPAIR " Procedure.