Integrated TCM Side Connector
INTEGRATED TCM INPUT/OUTPUT TERMINAL VOLTAGE
INTEGRATED TCM INPUT/OUTPUT TERMINAL VOLTAGE REFERENCE
| PIN No. | Signal | Condition | Input/output value | Test result | Remark | |
|---|---|---|---|---|---|---|
| Type | Level | |||||
| 4 5 |
Battery voltage (Main relay) | IG ON | DC Voltage | VBR | VBR | |
| 26 | Shift control solenoid valve-B | Shifting | DC Voltage | V_BAT | 14.01 V | |
| Max. 1.0V | 9.2 mV | |||||
| Vpeak: Max. -2V | -0.69 V | |||||
| 27 | Shift control solenoid valve-A | Shifting | DC Voltage | V_BAT | 14.01 V | |
| Max. 1.0V | 9.6 mV | |||||
| Vpeak: Max. -2V | -0.69 V | |||||
| 48 | Drive position PWM signal to trip computer | Idle | Pulse | HI: V_BAT or Vcc | 12.8 V | |
| LO: Max. 1.0V | 12 mV | |||||
| Freq.: 50Hz±2% (Reference) | 50.0 Hz | |||||
| 2' Position | Duty | 72.5±2% | 72.5 % | |||
| L' Position | ↑ | 12.5±2% | 12.5 % | |||
| 50 | Shift control solenoid valve-C | Shifting | DC Voltage | V_BAT | 13.97 V | |
| Max. 1.0V | 7.9 mV | |||||
| Vpeak: Max. -2V | -0.78 V | |||||
| 57 | Fluid temperature sensor | Idling | Analog | 0.5 ~ 4.5V | 2.16V | @72°C (161.6°F) |
| 60 | Pulse Generator B | 60kph | Sine Wave | Vp_p: Above 1.0V | 1.42 V | |
| Freq.: 1.5 ~ 2.0kHz (Reference) | 1.98 kHz | |||||
| 61 | Pulse Generator A | 3,000rpm | Sine Wave | Vp_p: Above 1.0V | 3.86 V | |
| Freq.: 1.1 ~ 1.3kHz (Reference) | 1.25 kHz | |||||
| 63 | Brake SW | Release Push | Max. 0.5V | 0.0 mV | ||
| V_BAT | 12.24 V | |||||
| 66 | Inhibitor SW "D" | "D" range Otherwise | V_BAT | 14.15 V | ||
| Max. 1.0V | 3.4 mV | |||||
| 67 | Inhibitor SW "P" | "P" range Otherwise | V_BAT | 14.21 V | ||
| Max. 1.0V | 4.2 mV | |||||
| 68 | Inhibitor SW "L" | "L" range Otherwise | V_BAT | 14.15 V | ||
| Max. 1.0V | 3.7 mV | |||||
| 70 | PWR4 GND | Idling | Max. 50mV | -4.2mV | (50.0Hz / 4.3kHz Chopping) | |
| 71 | Pressure control solenoid valve-A | Shifting | Pulse | HI: V_BAT | 13.8 V | |
| LO: Max. -3.0V | -0.85 V | |||||
| Vpeak: Max. -60V | -13.5 V | |||||
| 72 | Pressure control solenoid valve-B | Shifting | Pulse | HI: V_BAT | 13.8 V | (50.0Hz/4.3kHz Chopping) |
| LO: Max. -3.0V | -0.86 V | |||||
| Vpeak: Max. -60V | -13.5 V | |||||
| 80 | Fluid temperature sensor GND | Idling | Analog | 0.2V ~ 4.9V | 2.5V (58°C (136°F)) | |
| 82 | Pulse Generator B | 60kph | Sine Wave | Vp_p: Above 1.0V | 1.42 V | |
| Freq.: 1.5 ~ 2.0kHz (Reference) | 1.98 kHz | |||||
| 83 | Pulse Generator A | 3,000rpm | Sine Wave | Vp_p: Above 1.0V | 3.86 V | |
| Freq.: 1.1 ~ 1.3kHz (Reference) | 1.25 kHz | |||||
| 87 | Kickdown (K/D) servo | 1, 3 speed | DC Voltage | Max. 1.0V | 0.0 mV | |
| 2, 4 speed | V_BAT | 13.41 V | ||||
| 88 | Inhibitor SW "R" | "R" range Otherwise | V_BAT | 13.79 V | ||
| Max. 1.0V | 3.4 mV | |||||
| 89 | Inhibitor SW "2" | "2" range Otherwise | V_BAT | 14.19 V | ||
| Max. 1.0V | 4.1 mV | |||||
| 90 | O/D OFF SW | OD OFF | V_BAT | 14.21 V | ||
| OD ON | Max. 1.0V | 0.0 mV | ||||
| 91 | Inhibitor SW "N" | "N" range Otherwise | V_BAT | 14.22 V | ||
| Max. 1.0V | 3.6 mV | |||||
| 94 | Damper clutch solenoid valve | Lock Up ON | Pulse | HI: V_BAT | 13.9 V | (35.0Hz/4.3kHz Chopping) |
| LO: Max. -3.0V | -0.87 V | |||||
| Vpeak: Max. -60V | -13.5 V | |||||
|
||||||