DTC P0708 Transaxle Range Switch - Multi-Input: DTC Detecting Condition

DTC CHART

Item	Detecting Condition & Fail Safe	Possible cause
DTC Strategy	Check for multiple signals	Open or short in TRANSAXLE RANGE SWITCH Faulty TRANSAXLE RANGE SWITCH Faulty PCM
Enable Conditions	Engine speed ≥ 500rpm OUTPUT SPEED (PG-B) ≥ 0rpm
Threshold value	Multiple signal
Diagnostic Time	More than 30sec
Fail Safe	Recognition as previous signal When signal is input "D" and "N" at the same time, PCM regards it as "N" RANGE. After PCM reset, if the if the PCM detects multiple signal or no signal, then it holds the 3rd gear position.