LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Tucson GLS, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle System >> DTC Troubleshooting Procedure >> DTC P0885 A/T Relay Circuit Malfunction >> Ground Circuit Inspection

Ground Circuit Inspection

  1. Ignition "OFF".
  2. Connect the "A/T CONTROL RELAY" connector.
  3. Measure the resistance between terminal "2" of the "A/T CONTROL RELAY" harness connector and chassis ground.

    Specification: Approx. 0 Ω

    Fig 1: Measuring Resistance Between Terminal 2 Of A/T Control Relay Harness Connector And Chassis Ground
    G04811341Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within specifications?

    YES  : --> Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Check for open in harness. Repair as necessary and Go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals