Front Strut Assembly: Disassembly

Remove the dust cover (A) with a flat-tipped (-) screw driver.

Fig 1: Removing Dust Cover With Flat-Tipped Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Open the dust cover and wipe off grease in the insulator.

Fig 2: Removing Grease In Insulator
Courtesy of HYUNDAI MOTOR CO.
Using the special tool (09546-26000), compress the coil spring (A) until there is only a little spring tension on the strut.

Fig 3: Identifying Coil Spring, Self-Locking Nut & Strut Assembly When in Special Tool ((09546-26000))
Courtesy of HYUNDAI MOTOR CO.
Remove the self-locking nut (C) from the strut assembly (B).
Remove the insulator, spring seat, coil spring and dust cover from the strut assembly.