Control Circuit Inspection

Ignition "OFF".
Disconnect PCM connector.
Measure resistance between terminals 2 of the CCV harness connector and 79 of the PCM harness connector.
1. Specification: Approx. 0Ω
  
  Fig 1: Measuring Resistance Between Terminals 2 Of CCV Harness Connector And 79 Of PCM Harness Connector
  Courtesy of HYUNDAI MOTOR CO.
2. Is resistance within the specification?
  YES : --> Check for poor connection between PCM and component: backed out terminal, improper mating, broken locks or poor terminal to wire connection. Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure
  
  NO : --> Repair as necessary and go to "VERIFICATION OF VEHICLE REPAIR " procedure.