LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Tucson GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC - GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0197 Engine Oil Temp. Sensor Low Input >> Signal Circuit Inspection

Signal Circuit Inspection

  1. Ignition "OFF"
  2. Disconnect OTS connector.
  3. Measure resistance between terminal 2 of the sensor harness connector and chassis ground.

    Specification: Infinite

    Fig 1: Measuring Resistance Between Terminal 2 Of Sensor Harness Connector And Chassis Ground
    G04810771Courtesy of HYUNDAI MOTOR CO.
  4. Is resistance within the specification?

    YES  : --> Go to "TERMINAL AND CONNECTOR INSPECTION " procedure.

    NO  : --> Repair short to ground in harness and go to "VERIFICATION OF VEHICLE REPAIR " procedure.

scientia non olet · About LEMON Manuals