DTC P0113 Intake Air Temperature Sensor 1 Circuit High Input: DTC Detecting Condition

DTC DETECTING CONDITION CHART

Item	Detecting Condition	Possible Cause
DTC Strategy	Voltage range check	Open in signal or ground circuit Contact resistance in connections Faulty IAT sensor
Enable Conditions	6 < Battery voltage < 16V After 110 seconds from engine start
Threshold Value	Measured intake air temperature < -46°C (-51°F).
Diagnostic Time	5 seconds
Fail-Safe	No failure detected on ECTS The limp home value of IATS depends on engine coolant temperature. Failure detected on ECTS PCM controls with mapping data.