LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Tucson GLS, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Fuel System (G4GC - GSL 2.0) >> DTC Troubleshooting Procedures >> DTC P0112 Intake Air Temperature Sensor 1 Circuit Low Input >> Monitor SCANTOOL Data

Monitor SCANTOOL Data

  1. Ignition "ON" & Engine "OFF".
  2. Disconnect IAT sensor connector.
  3. Connect Scantool and monitor the "INT. AIR TEMP. SNSR (V)" parameter on the Scantool data list.

    Specification: Approx. 5V

    Fig 1: Identifying Scantool Display
    G04810690Courtesy of HYUNDAI MOTOR CO.
  4. Is displayed IAT data near the specified value.?

    YES  : --> Possibility of sensor malfunction. Go to "COMPONENT INSPECTION " procedure.

    NO  : --> Possibility of signal circuit short to ground. Go to next step as below.

scientia non olet · About LEMON Manuals