LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Tucson GLS, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Abs (Anti-Lock Brake System) >> G Sensor >> Inspection

G Sensor: Inspection

  1. Connect a tester to both 2 and 3 terminals of the G sensor.
  2. Measure the output voltage when IGN is on.

    Specification: 2.5V

    Fig 1: Measuring Output Voltage
    G03764142Courtesy of HYUNDAI MOTOR CO.
  3. Measure the output voltage between 2 and 3 terminals, passing the arrow mark on the G sensor downward.

    Specification: 3.5V

    Fig 2: Measuring Output Voltage While Moving Harness
    G03764143Courtesy of HYUNDAI MOTOR CO.
  4. Replace the G sensor if the output voltage is not on the specification.
scientia non olet · About LEMON Manuals