Seat Assembly Replacement: Notes

1. Remove the seat assembly mounting cover (A).
2. After loosening the seat assembly mounting bolt and nut, remove the seat assembly (B).
   Fig 1: Identifying Seat Assembly And Mounting Cover

   Courtesy of HYUNDAI MOTOR CO.
3. Open the connector box (A).
4. Disconnect the connector (B), and remove the seat assembly.
   Fig 2: Identifying Connector Box & Connector

   Courtesy of HYUNDAI MOTOR CO.
5. Installation is the reverse of removal.
   NOTE: Be sure to perform PODS re-zero with Hi-Scan (pro) after replacing parts (passenger's).
   CAUTION: SEAT MOUNTING BOLT INSTALLATION PROCEDURE.

   • Set the seat into the most rearward position. Check then each slide is locked, and then tighten the front mounting bolt temporarily.
   • Set the seat into the most forward position. Check that each slide is locked, and then tighten the rear mounting bolt completely.
   • Set the seat into the most rearward position. Check the front mounting bolt completely.
   • Check that the seat operates to and fro smoothly and the locking portion locks properly.