Coupling Assembly: Removal

WARNING: This page is about a different variant/trim than selected.

Remove the 4WD coupling bolts (A-3EA) mounted to the rear propeller shaft (B).

Fig 1: Identifying 4WD Coupling Bolts (A-3EA)
Courtesy of HYUNDAI MOTOR CO.
Using a flat tool (A), separate the propeller shaft (C) from 4WD coupling (B).

Fig 2: Separating Propeller Shaft From 4WD Coupling
Courtesy of HYUNDAI MOTOR CO.

Fig 3: Identifying Propeller Shaft From 4WD Coupling
Courtesy of HYUNDAI MOTOR CO.
Remove the rear axle (B-Differential carrier) bolts mounted to the 4WD coupling (A) by a socket (C).

Fig 4: Removing Rear Axle Bolts
Courtesy of HYUNDAI MOTOR CO.
Remove the electric magnetic clutch connector (A).

Fig 5: Identifying Electric Magnetic Clutch Connector
Courtesy of HYUNDAI MOTOR CO.
Remove the 4WD coupling assembly mounting bolts (A-4ea).

Fig 6: Identifying 4WD Coupling Assembly Mounting Bolts
Courtesy of HYUNDAI MOTOR CO.
Using a flat tool (A), separate the 4WD coupling assembly (B) from the rear differential carrier (C).

Fig 7: Identifying 4WD Coupling Assembly From Rear Differential Carrier
Courtesy of HYUNDAI MOTOR CO.
Remove the 4WD coupling assembly (A).