LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2008 >> Santa Fe GLS, FWD, Automatic >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Exterior Lights >> Auto Lighting Control System >> Auto Lighting Control System >> Auto Light Sensor >> Replacement

Auto Light Sensor: Replacement

  1. Disconnect the negative (-) battery terminal.
  2. Remove the Photo & auto light sensor (B) using screw (-) driver.
    Fig 1: Identifying Photo & Auto Light Sensor
    G05353589Courtesy of HYUNDAI MOTOR CO.
  3. Remove the auto light connector (C).
  4. Installation is the reverse of removal.
scientia non olet · About LEMON Manuals