Heater Control Unit Replacement

WARNING: This page is about a different car, the 2009 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the center fascia lower tray (B).
Remove the center fascia lower panel (A).

Fig 1: Locating Center Fascia Lower Panel & Center Fascia Lower Tray
Courtesy of HYUNDAI MOTOR CO.
Disconnect the connector (A), then remove the center fascia panel (B).

Fig 2: Locating Connector & Center Fascia Panel
Courtesy of HYUNDAI MOTOR CO.
Loosen the heater control unit mounting screw. remove the heater control unit (A).

Fig 3: Locating Heater Control Unit
Courtesy of HYUNDAI MOTOR CO.
Installation is the reverse of removal.
NOTE:
- Make sure the connector is plugged in properly.