Section 3 (Charging System): Alternator: Disassembly

WARNING: This page is about a different car, the 2009 Hyundai Accent. However, it is still accessible from the selected car via links, so may be relevant.

Remove the alternator cover (A) using a screw driver (B).

Fig 1: Identifying Alternator Cover & Screw Driver
Courtesy of HYUNDAI MOTOR CO.
Loosen the mounting bolts (A) and disconnect the brush holder assembly (B).

Fig 2: Identifying Mounting Bolts & Brush Holder Assembly
Courtesy of HYUNDAI MOTOR CO.
Remove the slip ring guide (A).

Fig 3: Identifying Slip Ring Guide
Courtesy of HYUNDAI MOTOR CO.
Remove the nut, pulley (A) and spacer.

Fig 4: Locating Pulley
Courtesy of HYUNDAI MOTOR CO.
Loosen the 4 through bolts (A).

Fig 5: Locating Through Bolts
Courtesy of HYUNDAI MOTOR CO.
Disconnect the rotor (A) and cover (B).

Fig 6: Locating Rotor & Cover
Courtesy of HYUNDAI MOTOR CO.
Reassembly is the reverse of disassembly.