Solenoid Valve: Inspection: Notes
CAUTION:
Do not apply impact to the solenoid. Do not damage the terminals.
3-WAY SOLENOID (S1, S2)
- Remove the side cover.
- Remove the 3-way solenoid (S1, S2).CAUTION: Do not apply impact to the solenoid.
- With a tester, measure the resistance between the solenoid terminal and solenoid body.
SPEC: 11~15Ω (at 20°C [68°F])
- Check that solenoid operates when connecting the battery positive terminal to the solenoid terminal and the battery negative terminal to the solenoid body.