LEMON Manuals: Even more car manuals for everyone
Home >> Hyundai >> 2007 >> Veracruz GLS, FWD >> Repair and Diagnosis >> Transmission >> Automatic Transaxle System (F21) >> Automatic Transaxle Control System >> Input Speed Sensor >> Removal

Input Speed Sensor: Removal

  1. Drain the oil by removing the overflow plug and the O-ring using a torx wrench (T40), and the drain plug (A) and the gasket by using a hexagon wrench (17mm).
    Fig 1: Identifying Drain Plug
    G05330361Courtesy of HYUNDAI MOTOR CO.
  2. Disconnect the oil cooler hoses from the tubes.
  3. Remove the 2 bolts to remove the oil cooler tubes (A) and the O-rings.
    Fig 2: Identifying Oil Cooler Tubes And Bolts
    G05330362Courtesy of HYUNDAI MOTOR CO.
  4. Remove the transaxle side cover and the valve body assembly, (refer to REMOVAL )
    CAUTION: Be careful not to drop the valve body assembly.
  5. Remove the input speed sensor (A).
    Fig 3: Identifying Input Speed Sensor
    G05330386Courtesy of HYUNDAI MOTOR CO.
scientia non olet · About LEMON Manuals